Instructions for use

How do you lubricate the drops?

WHEN? The recommended lubrication interval stated in the instruction booklet is 3 months after approximately daily use, or when the ink no longer glides smoothly when being wiped away.
Insufficient lubrication can, for example, result in a drop feeling stiff or making an unusual noise.

HOW? To avoid soiling the cushions, it is advisable to protect the area with an examination sheet.
To make it easier to access, the use of a narrow brush with a long handle is preferable and makes it easier to access the vertical axis of each drop.

Ticking each drop-down box grants the necessary access.

WITH WHAT? Vaseline oil or lithium grease are suitable, but there are also cans of medium-consistency grease available with pipette which are also suitable.
Products that are too runny, such as «WD40» or similar, are not suitable. (Cleaning effect, lack of staying power and liquid blackening).

Maintenance Regular

MAINTENANCE OF THE SURFACE COATING

To decontaminate the table, the synthetic surface can be cleaned using a spray of highly diluted Marseille soap, then wipe it dry.

The recommended method is to spray the liquid onto the examination sheet, off the table, and then wipe the surface with the damp examination drape. This prevents the soap from being sprayed unnecessarily onto metal surfaces that are not designed to have soap left on them permanently, as this would cause corrosion of the steel.

ADD VINYL PROTECTION

The vinyl protectors on the headrest, upper thoracic region and on the armrests are recommended as vinyl can be safely cleaned with soapy water. These protective covers are available either as removable covers or to be stapled underneath the panel, for each panel.

Replacement of floor coverings

Your table has been designed to last. But it is the floor coverings that are the first to suffer the ravages of time.

Thanks to the MEDEQUIP After-Sales Service, you can restore your table to its former glory!

Please contact our support team directly; we will send you a quote for replacing the covers only, or for replacing the assembled cushions, which is much easier. .

It’s also a chance to change the colour if you’d like, and to take advantage of exclusive colours, available exclusively from MEDEQUIP.

The vinyl plastic cover is a good way to protect the upholstery. If it becomes damaged, you can cut away the damaged section of the vinyl using a pair of small scissors and remove the stitching at the corners near the chin area of the headrest.

Tip

CHEST DROP : voltage adjustment

This small panel requires «fine» adjustment. The voltage applied across its drop must be low.

Therefore, if you find that the drop mechanism does not engage, lift the pick-up and fully loosen the drop tension knob. The panel will drop naturally and you will be able to adjust the tension again.

You may encounter the same problem with the drop mechanism. Simply raise the pick-up, loosen the knob so that you can operate the drop mechanism, and then lower the pick-up again.

Generally speaking, the tension of the various drops is adjusted by turning slightly the dial (between a quarter-turn for the thoracic region and one full turn for the pelvic region).

Instructions for use

We offer a high-quality after-sales service to ensure our customers’ satisfaction. Whether you need repairs, spare parts or advice, our team is always on hand to help. Your comfort and safety are our top priority.

CUSHION CARE

The wide range of sanitary ware (such as SANYO) includes not recommended as they can dry out the surface coating, which eventually makes it dry and brittle.

Using one examination sheet per patient is a bit of a hassle, but it is still a good compromise.

The best way to keep the materials in good condition is to clean them with a little water and then wipe them dry with the examination sheet. If necessary, use a little Marseille soap to remove the grease, then wipe dry.

Don’t forget to clean the armrests and the metal rod in the middle of the headrest cushions.

MAINTENANCE OF METAL PARTS

Clean the metal part of the headrest using a hand brushmade of synthetic fibre (supplied with your purchase) helps prevent limescale build-up.

If the steel has been damaged, you can touch it up using a metallic grey spray paint. In this case, clean the area to remove any soap residue and dry it. Spray a little paint into the «spray can cap» (away from the table) and pick up this liquid paint with a brush (round, fine and long-handled) to apply it in small strokes.

CARE OF NATURAL LEATHER

Manufacturer’s instructions:

Leather should be cleaned and vacuumed regularly to remove dirt and debris from the seams with a soft, damp cloth. Do not use NO SOAP or alkaline products on the leather, as these can cause the leather to dry out or crack. If necessary, use lukewarm soft water to clean specific areas and a soft cloth to dry.

Precautions : Avoid excessive rubbing. Keep a distance of 25 cm from heating appliances. A healthy level of humidity is good for leather.

Do not use : Harsh substances such as stain removers, cleaning solvents, turpentine, shoe polish, saddle soap, oils, varnish, abrasive cleaners, detergents, ammonia or any other type of chemical solution.

DROPS TO BE LUBRICATED

It takes approximately every 3 months, or when you notice they’re getting hard.

Frequently Asked Questions

Your concerns regarding our after-sales service.

Do you have any other questions?

We’re here to answer any questions you may have. Below you’ll find the most frequently asked questions about our after-sales service. If you can’t find the answer you’re looking for, please don’t hesitate to contact us.

What is our warranty policy?

We offer a two-year warranty on all our equipment. Should you experience any problems, please contact us directly for instructions on repair or replacement.

How do I make a warranty claim?

To contact our after-sales service, please complete our online contact form. We will guide you through the steps required to resolve your issue.

What are the response times?

We aim to respond to all enquiries within 48 hours. If your enquiry is urgent, please do not hesitate to call us directly.

What should you do if a product is faulty?

If you receive a faulty product, please contact us within 14 days of receipt. We will take immediate action to resolve the issue.

Can I cancel a customer service request?

Yes, you can cancel your request within 48 hours of submitting it. Please contact our customer service team to cancel it.